Americover - ZipWall® Systems™ - Dust control system for remodeling jobs

Anti-Static, Fire Retardant 6 mil Film - ASFR6

ZipWall^® Systems^{™

Self supporting dust barrier!}

ZipWall is a unique dust control system that can save you hundreds of hours on all kinds of remodeling jobs: carpentry, floor finishing, wall and celings, painting, sheetrock work, asbestos or lead paint abatement, demolition... whenever dust protection is needed.

THIS BARRIER WAS CREATED BY ONE MAN
IN LESS THAN 5 MINUTES!

Easy to Install Instructions

1. After attaching jack to pole, unlock plate on jack by sliding pegs into large holes on head. Remove plate from head.	2. Place plastic sheeting on head. Use pegs on plate to push plastic into large holes on head. Lock by sliding pegs into the small holes.	3. Unlock pole by turning inner pole counter-clockwise.

4. With foot of pole on ground, extend pole up so that the plate is pressed against the ceiling by spring action of the jack. Turn pole extension clockwise to lock it.	5. Check fit of plastic against the ceiling. If it droops, loosen extension pole and move to a position that pulls the plastic tight. Note: Entire wall must be secured at top before securing bottom.	6. Raise pole and pull plastic sheeting under foot to make a tight fit along the bottom of the wall.