10 Mil Clear Dura-Skrim® Reinforced Plastic Sheeting
Heavy-duty, scrim-reinforced poly sheeting built for jobsite abuse — indoors or out.
10 Mil Clear Dura-Skrim® Reinforced Plastic Sheeting gives contractors, growers, and remediation crews a tear-resistant clear poly film that holds up where standard visqueen fails. The diamond-pattern scrim and four-layer polyethylene construction deliver puncture resistance, UV stability, and certified vapor retarder performance in a single roll.
💡 Best fit: Jobs that need a clear, see-through cover with real tear strength — temporary enclosures, greenhouse covers, vapor barriers, and outdoor protection where a standard 6-mil poly won’t last the season.
Features and Benefits
Scrim-Reinforced for Tear Resistance
The signature diamond-pattern scrim runs between layers of polyethylene film, locking the sheet together so a small puncture doesn’t run the length of the roll. That’s the difference between a patch and a full replacement when something gets dropped, stepped on, or snagged on a fastener.
Four-Layer Polyethylene Construction
Four bonded layers of high-strength poly deliver 80 lbf grab tensile and 55 lbf trapezoid tear strength. The film handles wind load, foot traffic on horizontal applications, and contact with framing, rebar, and equipment without splitting at the stress points.
UV Inhibitors and Thermal Stabilizers
Manufactured with a high concentration of UV inhibitors and thermal stabilizers, the 10 mil clear reinforced sheeting resists sun and temperature swings for up to one year in fully exposed outdoor conditions. Service temperature ranges from -70°F to 180°F, so it stays workable through cold-weather installs and stable under summer heat.
ASTM E96-Tested Vapor Retarder Performance
At 0.031 perms (ASTM E96, Procedure B), this film meets Class A perm rating requirements — suitable for under-slab vapor barriers, radon mitigation membranes, and crawl space liners where low-perm performance is part of the spec.
Clear Visibility
The colorless film transmits light, which matters for greenhouse covers, temporary glazing, and any containment where crews need to see in or out without removing the sheeting.
🌱 Ideal for: General contractors, greenhouse growers, abatement and remediation crews, and concrete subcontractors needing a single roll that handles both vapor barrier specs and tear-prone outdoor exposure.
Why Reinforced Plastic Sheeting Matters
Standard non-reinforced polyethylene sheeting tears along stress lines. One nail head, one dropped tool, and a small hole becomes a 10-foot rip. Reinforced sheeting puts a scrim grid between film layers, so damage stays localized. For any job longer than a few days — or any job where wind, weather, or jobsite traffic is a factor — reinforced poly pays for itself in fewer callbacks and fewer replacements.
>The Dura-Skrim® 10HUV product line is engineered specifically for that gap: lighter than a tarp, tougher than standard visqueen, and clear enough to use where light transmission matters.
| Feature | Benefit |
|---|---|
| Diamond-Pattern Scrim Reinforcement | Stops punctures from running — small damage stays small. |
| 10 Mil Four-Layer Polyethylene | Handles foot traffic, wind, and contact with framing and rebar. |
| UV Inhibitors + Thermal Stabilizers | Up to one year of fully exposed outdoor service life. |
| 0.031 Perms (ASTM E96) | Meets Class A perm rating for under-slab and radon mitigation use. |
| Clear Film | Transmits light for greenhouse, glazing, and visible containment. |
| -70°F to 180°F Service Range | Stays workable in winter installs and stable in summer heat. |
💰 Spec it once, install it once. Reinforced sheeting costs more per square foot than standard poly, but the tear resistance means fewer replacement rolls, fewer crew hours patching damage, and fewer callbacks on long-duration jobs.
Common Applications
- Under-slab vapor barriers — meets Class A perm rating for concrete pours
- Radon mitigation systems — used as the membrane layer in active and passive sub-slab depressurization systems
- Crawl space liners — moisture control and encapsulation in residential and commercial crawl spaces
- Greenhouse covers — short-season covers and overwinter protection where clear light transmission is needed
- Temporary enclosures — jobsite weatherization, dust containment with visibility, winter framing protection
- Equipment and material covers — outdoor storage protection for lumber, equipment, and staged materials
- Abatement and remediation containment — reinforced barrier walls and decontamination chambers
- Asbestos and lead containment — when paired with appropriate sealing and PPE protocols
🌞 Need longer outdoor life? For greenhouse and ag covers that need to last multiple seasons, use SolaScrim 4-Year 10 Mil Clear Reinforced Greenhouse Cover. It carries a four-year UV warranty for fully exposed installations.
Why Professionals Choose 10 Mil Dura-Skrim®
Contractors choose reinforced clear poly when standard sheeting won’t survive the job. The trade-offs are simple: thicker non-reinforced film adds weight without adding tear strength, and tarps block light. Dura-Skrim® 10HUV splits the difference — light enough to handle, strong enough to last, clear enough to see through.
>Growers and remediation crews repeat-order it because it specs into multiple parts of a job. The same roll can serve as a vapor barrier on Monday and a containment wall on Wednesday.
Related reinforced sheeting options:
Technical Specifications
| Property | Test Method | Value |
|---|---|---|
| Appearance | — | Colorless |
| Thickness (Nominal) | — | 10 mil (0.25 mm) |
| Weight | — | 41 lbs/MSF (200 g/m²) |
| Construction | — | Extrusion laminated with scrim reinforcement |
| 1″ Tensile Strength | ASTM D7003 | 60 lbf/in (105 N/cm) |
| Elongation at Film Break | ASTM D7003 | 500% |
| Grab Tensile | ASTM D7004 | 80 lbf (356 N) |
| Trapezoid Tear | ASTM D4533 | 55 lbf (245 N) |
| Mullen Burst | ASTM D751 | 90 psi (621 kPa) |
| WVTR | ASTM E96, Procedure B | 0.214 grains/(100in²·day) |
| Perm Rating | ASTM E96, Procedure B | 0.031 perms |
| Max Static Use Temperature | — | 180°F (82°C) |
| Min Static Use Temperature | — | -70°F (-57°C) |
Frequently Asked Questions
What is 10 Mil Clear Dura-Skrim® Reinforced Plastic Sheeting used for?
It is used for under-slab vapor barriers, radon mitigation membranes, crawl space liners, greenhouse covers, temporary jobsite enclosures, and containment in abatement and remediation work. The reinforced scrim makes it suitable wherever standard poly would tear.
How long does 10 Mil Dura-Skrim® last outdoors?
Up to one year in fully exposed outdoor conditions. Actual service life depends on UV exposure, fastening method, wind load, and jobsite handling. For multi-year outdoor use, choose SolaScrim 4-Year Clear Reinforced Sheeting instead.
Is Dura-Skrim® 10 Mil a Class A vapor retarder?
At 0.031 perms tested per ASTM E96 Procedure B, it meets Class A perm rating requirements. Full Class A vapor retarder classification under ASTM E1745 also requires tensile and puncture testing — confirm project spec requirements before submittal.
💡 Pro tip: For under-slab installs, overlap seams 6–12 inches and tape with a compatible seam tape. Verify your local code requirements — some jurisdictions reference ASTM E1745 Class A, B, or C, which is a separate spec from ASTM E96 perm rating alone.
What is the difference between 6 Mil and 10 Mil Dura-Skrim®?
The 10 mil version is thicker, heavier (41 lbs/MSF vs 17 lbs/MSF), and has higher tensile, tear, and burst strength. Both are reinforced and UV-stabilized. Choose 10 mil when the job involves heavier traffic, longer exposure, or stricter vapor retarder requirements.
Can Dura-Skrim® be used as a greenhouse cover?
Yes. The clear film transmits light and the scrim reinforcement resists wind tear. For single-season covers, 10 Mil Dura-Skrim® works well. For multi-year greenhouse covers, use the 4-year SolaScrim product.
Does Americover offer custom sizes or fabrication?
Yes. Custom widths, lengths, and fabricated covers are available. Lead times vary by specification. Contact Americover at 800-747-6095 or sales@americover.com for a custom quote.
Is this product manufactured in the USA?
Yes. Dura-Skrim® is manufactured in the United States. BABA-compliant options are available for federal and government projects — contact your account manager to confirm compliance documentation.
