Easy to Install
- Measure the length of the cord needed by determining where the top of the vinyl will start to get the desired coverage. Unwind that length of cord and leave the rest on the hanger.
- A minimum of 18” is recommended by many fire marshals for sprinkler clearance. Check with your fire Marshall to be sure.
- Use a single hole paper punch or knife to put a hole in the vinyl 1” an inch from the edge. Put cord through the hole and rest on the metal brad attached to the end or tie it off.
- Squeeze the bottom portion of the clip together it will open the top of the clip. Clip over ceiling grid.
It’s just that EZ!
Space 18” to 24” apart across the vinyl depending on the direction of your ceiling grid.